Car Chabi is compatible with 99% of the cars in the market right now including manual or stick shift cars! We have installed in almost all the cars in the market. We have installed the device in over 5000 cars and growing. From German, Japanese, American and other European manufacturers, our device proves to be compatible with all of the mentioned.
Our device is compatible with 99% of the cars in the market. Which means that our device is compatible with all kinds of cars. From Key start to Push Start. From Manual/Stick Shift to Auto cars.
How to install in Stick Shift/Manual cars
First, open up cover around the ignition switch. Take out wires of ACC, Power/On, and Start. Some cars have built-in relays while others need to attach external relays.
If the internal wiring is of the similar in with to the Grip 4 wiring of the MoboKey device, then no external relays are needed. Cut the wires at the points 1,2,3 and connect them to the points 5,6,7 respectively.
If the internal wiring is thick and similar to the green wires with the relays, then don’t cut the wiring at 1,2,3,4 and connect as shown in the diagram.
If the car has a manual transmission or sticks shift, don’t cut the wire at point 3 in any case and make sure to connect the negative wire of the relay to the negative of the handbrake.
This connection makes sure that the car does not start when the hand brake is not pulled. This safety feature makes sure that in case the car is in gear and the hand brake is not pulled, it will not start at all.
In case the car is in gear and is in gear, the car takes a jerk and stops at the same instant. Read more about Smart Key: Click here!
Therefore, we say that Mobokey is compatible with manual cars.
So, Download your application here: Go to Play Store or App Store!
Get more info about MoboKey: An App which is your Smartphone Car Key
If you haven’t got your Car Chabi device, you are left out on so many things. Order here!
Read more here.
So, Start, Unlock and Share your car with Mobokey and Control Car via Smartphone!
